4 room house plan pictures are not easy for many people to translate the lines of a drawing into a spatial representation of a house. But with some patience you can develop an understanding of house plans, at least enough to know what your builder or architect is talking about. And the more you study the plans, the more you will understand and be able to speak intelligently about what works or does not work for your particular home.
24 Photos Gallery of: Design Of 4 Room House Plan Pictures
Look at each sheet of plans. The plans can include a three-dimensional drawing of what the finished house could look like. You should have four heights, a plan drawing per house floor, a ceiling plan, a basement plan (optional), a foundation plan, an electrical plan, a mechanical plan, a detail sheet and if your country is chosen, you should have a blank plan. You can also have special features plans or material lists, but these are less common. Examine three-dimensional drawing of the house. In general, the interpretations of homes are reasonably correct as the architect and the builder imagine your finished house is displayed. If you do not like what you see make notes to share with architects or builders.
Tape down some lime paper and draw what seems wrong. The drawing must locate problem areas for the architect. Make a separate sheet for each page where you have a question. Open the plan to first floor plan. This plan details the placement of walls using a thick line. The thin lines indicate measurements in feet. Most house plans are quarter inch scale or too much big home, an eighth inch scale. To better understand the measurements use ruler. A quarter inch is equal to one foot. Examine rooms. Each room must be clearly marked. In bathroom fixtures like bathtubs, showers, commodes, vanity and sinks should be pulled if you look down into the room.
Stairs will have an arrow indicating the direction and the word up or down next to the arrow. This makes it possible to see which stairs are going up and down. Doors are indicated by door swings or slides, bypass or bifold. In the outer wall you should see open areas with thin lines instead of the thick wall indicating those windows and doors. Each should be labeled with dimensions and lines outside the walls indicate center marks to windows and doors in relation to other features of the home. All corners should be labeled. The lines closest to the outside walls will show the window detail. Read inside measurements in a similar way. The lines indicate room sizes or where wardrobes or corners fall into these measurements. This will apply to each floor plan. You should see a line in the middle of the sheet.